Intake Manifolds

- Basic operating RPM range: 3500-8000- Intake manifold height: 5.5”- Natural finish- Made from aluminumThis Victor Jr. Intake Manifold features a low profile single-plane design, a cast aluminum construction with a natural finish. This manifold...

The Edelbrock Super Victor EFI intake manifold is designed for high-rpm and competition 289 / 302 engines with aftermarket Windsor-style performance cylinder heads.  This intake manifold is excellent for larger displacement drag racing engines and...

This cast EFI intake elbow allows the use of Ford throttle bodies on any intake manifold w/ the 4150 mounting flange. Slotted mounting holes & dual throttle cable mounting bracket bosses allow the elbow & throttle body to be mounted forward,...

This Edelbrock intake elbow is an ultra high flow (up to 1050 cfm) adapter elbow for throttle body placement on an Edelbrock Super Victor EFI intake manifold.  Will accept up to a 95 mm Ford 86-93 style throttle body.

These aluminum adapters allow the use of a '86-'93 style intake manifold on 1994-95 5.0L Mustangs. Available in Natural Aluminum Silver finish or Black Powdercoat (select above) 75mm opening

Edelbrock Performer RPM II intake for 86-95 5.0 Mustang(Requires adapter for use with 94-95 throttle bodies)Edelbrock Says:The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs in the...

Edelbrock Performer RPM II intake for 86-95 5.0 Mustang Black (Requires adapter for use with 94-95 throttle bodies)Edelbrock Says:The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs...

Edelbrock's Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley...

Stealth™ Intake Manifold 221, 260, 289, 302 V8 Features: Port Size: 1.83” height 1.02" width Height: Front 4.35", Rear 5.59" High Rise Dual Plane Design Square Carburetor Mounting Flange No EGR provisions Power band: Idle-6000...

Anderson 2018+ Intake Manifold Swap Kit for 2011-2014 Mustang GT Complete kit to correctly install the popular 2018 Mustang GT intake manifold on your gen 1 Coyote Mustang. The 2018 Mustang GT intake manifold is an excellent naturally aspirated...

11-17 Mustang GT for 2018+ Intake Manifold swaps deleting the CMCV/IMRC assemblies. A must for have when swapping 11-14 Mustang GT with 18+ Intake Manifolds. Can be used with 15-17 Mustang GT if deleting the CMCV/IMRC assemblies as well. Easy...

Fits 2011-2014 Mustang GT 5.0L 4V Ti-VCT engine Original equipment on Mustang Boss 302, 302S and 302R Race Cars Made from light-weight composite material Short runners for optimum flow at high rpm's. Includes unique Ford...

Fel-Pro Performance Intake Gasket composite,Printoseal, 2.10 in. x 1.28 in. Port, .060 in. Thick, Ford, 260/289/302/351W, Set

Fel-Pro Performance Gaskets,Intake,Composite, 2.25 in. x 1.40 in. Port, .090 in. Thick, Ford, 260/289/302/351W, Set

OEM Ford 2018+ Mustang GT Intake Manifold Assembly. (Photo is representation, current part number may be completely black in finish) An excellent performance upgrade for 11-17 Mustang GT's. Gaskets are preinstalled. Has CMCV/IMRC assemblies installed...

They say black is the new chrome. If so, Holley just added the right amount of shine! Holley is proud tointroduce several of our popular Holley and Weiand intake manifolds in our all new Carbon Black CeramicCoating! The coating provides an aggressive yet...

(Requires adapter for use with 94-95 throttle bodies) Holley says:This Ford EFI passenger car manifold was developed by Holley for its SysteMax II Ford performance package. Don't be fooled by its California emission-legal designation. This manifold will...

FITMENT: 1986-1993 Ford Mustang 5.0LJ&L 3.0 Oil Separator 3oz CapacitySolid billet construction.Limited Lifetime Warranty How does it work? During the process of venting crankcase pressure back through your intake track, large amounts of oil, in...

FITMENT: 1999-2004 Cobra Driver Side 2003-04 MACH I Driver Side J&L 3.0 Oil Separator 3oz CapacitySolid billet construction.OEM Style quick connect PCV fittingsLimited Lifetime Warranty How does it work? During the process of venting crankcase...

FITMENT: 1999-2004 Mustang GT Passenger Side 2001 Bullitt Mustang Passenger Side J&L 3.0 Oil Separator 3oz CapacitySolid billet construction.OEM Style quick connect PCV fittingsLimited Lifetime Warranty How does it work? During the process of...