Throttle Bodies

Fits 1986-1993 Mustang 5.0 OEM Ford TPS sensor.

If you want to have the ability to convert your Holley EFI equipped Fox Body to the GM style idle air control stepper motor on your throttle body then this kit is for you. The Anderson Gen 3 Holley EFI harness has the GM style stepper IAC harness built...

If you want to have the ability to plug and play the Idle Air Control and Throttle Position Sensors with the Universal Holley HP, Terminator X or Dominator EFI wiring harnesses then this kit is for you. Accufab has created a setup that has made it easy...

Accufab 75mm Cable Bracket Spacer 3/8" thickCable Bracket is 3/8" thick and is solid aluminum (no water passages and no vacuum tubes) and has provisions to mount the stock cable bracket and includes two throttle body gaskets

Accufab 75mm Throttle Body & EGR Spacer Kit for 86-93 Mustang 5.0Accufab Standard version throttle body has a vacuum elbow and the exact mm size is measured  at the blade.  The OD of the inlet is approximately the same mm specifiedThe...

Accufab 80mm Cable Bracket Spacer 3/8" Thick Cable Bracket is 3/8" thick and is solid aluminum (no water passages and no vacuum tubes) and has provisions to mount the stock cable bracket and includes two throttle body gaskets

Accufab 90mm Cable Bracket Spacer 3/8" thick Cable Bracket is 3/8" thick and is solid aluminum (no water passages and no vacuum tubes) and has provisions to mount the stock cable bracket and includes two throttle body gaskets

Accufab 75mm Race Polished Throttle Body & 2" Spacer Kit 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 75mm through 90mm have a 4"...

Accufab 75mm Race Polished Throttle Body 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the ball Race versions sized 65mm through 90mm have a 4" inlet or opening.  An Anderson Power...

Accufab 80mm Race Polished Throttle Body & 2" Spacer Kit 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 75mm through 90mm have a 4"...

Accufab 90mm Race Polished Throttle Body & 2" Blank Spacer Kit 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 65mm through 90mm have a...

Accufab 90mm Race Polished Throttle Body 86-93 Mustang 5.0A Race version throttle body does not have a vacuum elbow and the exact mm size is measured at the blade.  However, all Race versions sized 65mm through 90mm have a 4" inlet or opening. An...

Accufab offers this high performance 70mm throttle body and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking. CNC 6061-T6 Billet...

Accufab 75mm throttle body was designed to be used on the 1986-1993 Ford 5.0L Mustang. A Standard version throttle body has a vacuum elbow and the exact mm size is measured  at the blade.  The OD of the inlet is approximately the same mm...

Accufab's 70mm throttle body kit including full size blank spacer for EGR delete.  Fits 1986 - 1993 Mustang 5.0.

Accufab's 75mm throttle body kit including full size blank spacer for EGR delete.  Fits 1986 - 1993 Mustang 5.0.