Supercharger Accessories

Synthetic lubricant for V-3 superchargers. This special fluid is required for proper maintenance of the V-3 supercharger. Use of any other fluid will void the warranty and may cause component failure. Fluid Level Checking ProcedureEnsure that the .06"...

AEM 35 PSI Boost Dependent Water/Methanol Injection Controller and Wiring HarnessAEM’s Boost Dependent water/methanol injection controller is ideal for vehicles running up to 35 PSI of boost. It has an on-board manifold absolute pressure (MAP)...

Anderson Ford Motorsport now has what every Vortech owner has always wanted.An easier way to adjust your Supercharger belt. ( For 8 rib pulley )This billet adjuster mounts easily to your Supercharger and allows you to loosen the tensioner bolts and...

Dayco 8-Rib,  53 7/8" Belt

Dayco 8-Rib,  54 5/8" BeltUsed in Anderson Vortech Supercharger Tuner Kits for 89-93 5.0 Mustang Kit with 3.12 pulley Can be used with 2.95 pulley as well.

Dayco 8-Rib, 56 5/8" Belt

Laser cut steel mounting flange with 2" diameter extention tube for mounting the Vortech Mondo Bypass valve. 

Vibrant Performance Aramid Reinforced Silicone Transition Hose Couplers feature High Temperature Resistant Aramid Reinforcement Fabric between each layer of silicone which allows for an impressive Operating Temperature Range of -75° F to 392° F...

Vibrant Performance Aramid Reinforced Silicone Straight Hose Couplers feature a 4-ply Aramid reinforcement fabric between each layer of silicone which allows for an impressive operating temperature range of -75° F to 392° F (-60° C to...

Vibrant Performance Aramid Reinforced Silicone Straight Hose Couplers feature a 4-ply Aramid reinforcement fabric between each layer of silicone which allows for an impressive operating temperature range of -75° F to 392° F (-60° C to...

Vortech 10 Rib Supercharger Pulleys 2.95"

Vortech 8-Rib, 2.95" Pulley

Vortech 8-Rib, 3.12" Pulley

Vortech 8-Rib, 3.47" Pulley  

Vortech FMU Air Bleed Regulator When using an FMU with larger injectors or for fine tuning when other components that alter airflow are being used, Vortech offers an optional air bleed valve. This permits the rate of gain for any of the Vortech FMUs to...

Standard By-pass Valve Specifically designed for street applications. Eliminates compressor surge and reduces heat soak in the discharge tube. Recommended for vehicles running 6 to 12 PSIG. Both inlet and outlet mate to a 1" hose.