Supercharger Accessories

Synthetic lubricant for V-3 superchargers. This special fluid is required for proper maintenance of the V-3 supercharger. Use of any other fluid will void the warranty and may cause component failure. Fluid Level Checking ProcedureEnsure that the .06"...

Unlock 50-80HP on your boosted vehicle while decreasing your air temps by up to 150 degrees! The all new Snow Performance Stage 2 Boost Cooler® water-methanol injection system comes fully revamped in 2015 for all boosted (turbocharged/supercharged)...

 The heritage of a Vortech Supercharger on Fox Body Mustangs is legendary – it is more common to see a Fox Body with a Vortech Supercharger installed than without! For those looking to mount a Heavy      ...

Vortech supercharger discharge tubes are designed to connect the supercharger head unit to the OEM throttle body. They are manufactured from high-quality aluminum and are available in satin or polished finishes. Complete the installation of your Vortech...

Features: The 6 BTM is ideal for engines with a turbo or supercharger. Not only will the engine benefit from MSD's full power CD sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation.When your turbo or blower...

Features: OPERATING SPECIFICATIONS Spark Energy: 135 mJ per spark Primary Voltage: 535 Volts Secondary Voltage: 45,000 Volts Spark Series Duration: 20 degree Crankshaft Rotation RPM Range: 12,500 RPM with 14.4 Volts Voltage Required: 12-18...

The Vortech Maxflow® Race Bypass Valve flows 320 CFM@8 PSIG and features a compact design that is ideal for sport compacts and other applications with tight engine compartments. These units will retrofit to standard HKS/Greddy style mounting pads and...

AEM 35 PSI Boost Dependent Water/Methanol Injection Controller and Wiring HarnessAEM’s Boost Dependent water/methanol injection controller is ideal for vehicles running up to 35 PSI of boost. It has an on-board manifold absolute pressure (MAP)...

If you are running the standard Vortech/Paxton bracket and inlet tube on your supercharged 5.0L Mustang then this kit is for you! Eliminate belt slip and add approx. 1-2 lbs of boost without changing a supercharger pulley! The Anderson Power Pipe®,...

Anderson Power Pipe® for Procharger F-1, P-Series, D-1SC with A/C on 86-93 Mustang 5.0The Anderson Power Pipe®, with its all 4" mandrel bent Ceramic coated inside and out construction, is the highest flowing inlet pipe available for centrifugal...

Anderson Power Pipe® for Procharger F-1, P-Series, D-1SC without A/C on 86-93 Mustang 5.0The Anderson Power Pipe®, with its  all 4" mandrel bent Ceramic coated inside and out construction, is the highest flowing inlet pipe available for...

Vortech,S,T,YSI Trims, Paxton Novi 2000, Powerdyne Superchargers on 86-93 Mustang 5.0 The Anderson Power Pipe®, with its all Aluminum mandrel bent construction, is the highest flowing inlet pipe available for centrifugal superchargers. We also...

Anderson Ford Motorsport now has what every Vortech owner has always wanted.An easier way to adjust your Supercharger belt. ( For 8 rib pulley )This billet adjuster mounts easily to your Supercharger and allows you to loosen the tensioner bolts and...

Dayco 8-Rib,  53 7/8" Belt

Dayco 8-Rib,  54 5/8" BeltUsed in Anderson Vortech Supercharger Tuner Kits for 89-93 5.0 Mustang Kit with 3.12 pulley Can be used with 2.95 pulley as well.

Dayco 8-Rib, 56 5/8" Belt

10-Rib Pulley Pack with 3.33" Supercharger Pulley and 6.87" Crank Pulley Fits: 1986 - 1993 Vortech equipped Mustangs with 302 based engines Will produce 11-12 psi at 6k rpm with our AFM-Vortech Systems.

Laser cut steel mounting flange with 2" diameter extention tube for mounting the Vortech Mondo Bypass valve. 

Vibrant Performance Aramid Reinforced Silicone Transition Hose Couplers feature High Temperature Resistant Aramid Reinforcement Fabric between each layer of silicone which allows for an impressive Operating Temperature Range of -75° F to 392° F...

Vibrant Performance Aramid Reinforced Silicone Straight Hose Couplers feature a 4-ply Aramid reinforcement fabric between each layer of silicone which allows for an impressive operating temperature range of -75° F to 392° F (-60° C to...