EFI Engine Management

Plug and play for Holley Avenger, Terminator X, HP, and Dominator ECU fuel and oil pressure inputs. 1/8" NPTFeatures:•Plug and play for both fuel and oil pressure inputs with Holley EFI systems•Stainless steel construction•Comes with...

The Holley EFI 5-inch Digital Dash comes out of the box, ready to plug and play with your Gen 1 Sniper EFI, Terminator X or X MAX, and Holley EFI Dominator or HP ECU. The 5-inch digital touch screen display is pre-loaded with 3 easy to read layouts...

This 3.5" Touch Screen LCD Handheld Controller gives you access to a wide range of tuning options. Additionally this display can be used as a fully customizable data monitor! With this 3.5" display your system vitals can be viewed with a quick glance!...

Replacement Holley EFI NTK Wide band Oxygen sensor. This sensor is a direct replacement for Holley HP, Dominator, Avenger and Terminator EFI systems. Each Sensor is hand calibrated to insure accurate readings when used in conjunction with your Holley EFI...

Replacement Holley EFI, Bosch Wide Band Oxygen Sensor.This sensor is a direct replacement for Holley HP, Dominator and Avenger EFI systems. Each Sensor is hand calibrated to insure accurate readings when used in conjunction with your Holley EFI system...

Have you been searching for a reason to discard your old noisy mechanical speedometer cable? If so, the Holley GPS Module for our 7" Digital displays should be the next addition to your project vehicle. Featuring a simple plug and play installation, this...

Holley EFI ECU mounting brackets, allowing you to safely mount your ECU under the seat of a Foxbody Mustang. Easy Installation of Holley HP, Terminator X, or Terminator X Max ECU in Your Mustang Fits all 79-04 passenger seat mounting holes (hardware...

Ford V8 Injector Harness for Ford USCAR / EV6 style Fuel Injectors (Evenly Spaced) Works with Holley EFI systems Terminator X, X Max, HP and Dominator main harnesses. Eliminates the need for injector adapters, just swap injector harnesses and go!

Great for applications requiring minimal Input/output wiring. 4 Output Wires 4 Input Wires Connector J1A/B Inputs/Outputs Auxiliary Harness for Terminator X, HP, and Dominator EFI systems

Used when adding a second wide band oxygen sensor to a Dominator EFI installation. For use with Bosch 4.2 and NTK wideband sensors. Features: J2A Connector #2 Wide band oxygen sensor harness (Fully Terminated) 23 user programmable input wires with...

The CAN to USB communication cable provides the user with real tuning time access to the ECU. This cable can be used with Holley EFI, Sniper EFI, and Terminator X Tuning Software. Which can be downloaded for free from the Support section of our...

This harness is designed for the 1986-1995 Ford 5.0 HO Mass Air Flow EFI engines. You must use the 1989-1993 MAF and Distributor. 1986-1988 must add MAF (mass air flow) sensor. 1994-1995 must modify TPS wiring and change distributor. Harnesses do not...

If you want to have the ability to convert your Holley EFI equipped Fox Body to the GM style idle air control stepper motor on your throttle body then this kit is for you. The Anderson Gen 3 Holley EFI harness has the GM style stepper IAC harness built...

If you want to have the ability to plug and play the Idle Air Control and Throttle Position Sensors with the Universal Holley HP, Terminator X or Dominator EFI wiring harnesses then this kit is for you. Accufab has created a setup that has made it easy...

  Anderson base tune file for AFM-Holley Terminator X equipped Fox Body Mustangs. (Please read all the details below) Base tunes are for pump gas 91 or 93 octane only Fee is $80 per tune file After purchase fill out your tune order form link...

Bosch 4.9 Wideband O2 Sensor Replacement Bosch Wideband Oxygen sensor for Sniper EFI and Terminator X and X Max systems. Original equipment for AFM Gen 2 Holley kits. Anti-Seize pre-applied to sensor threads. Service Oxygen Sensor for Sniper EFI...

 An air conditioning specific Wiring kit for 87-93 Mustangs using Holley Terminator X, X Max, HP and Dominator systems. Produced by Fathead Garage. A simple to wire up and easy to install wiring kit that has all the appropriate connections to add...

Holley 3 Bar MAP sensor for use with Holley Terminator X ECU and Terminator X Max on Foxbody Mustang. Comes with new weatherpak connector to make a direct plug and play or can modify Terminator harness plug for the plastic bosses to fit correctly. For...

The Holley EFI CAN splitter allows you to add an additional CAN device to your Sniper EFI or Terminator X installation, without needing to unplug the handheld. This easy to install CAN splitter simply plugs into the CAN connector on your main harness,...

Holley EFI 3.5" Touch Screan LCD for use with all Terminator, HP, and Dominator EFI systems  This touch screen LCD provides a dynamic range of tuning and data monitoring options in a compact, full color 3.5" LCD display. Features: *Laptop-free...