Dakota Digital Dash EZ Harness Professional Installation Kit for 87-93 Mustang

Use the Digital EZ harness to give you that professional touch for your aftermarket digital gauge installation!  The connectors are a direct fit onto the factory 14-pin connectors in your dash.   No need to hack up your OEM wiring and can be reversed in the future.   Utilizing 18-awg automotive grade TXL wire, the kit comes with wire loom and pre labeled wires with hardware to make your install EZ.    The factory connectors often have minimal length wires which makes splicing even more of a head ache.    We solve that problem for you!   Save time and frustration with the Digital EZ harness installation kits.

Note:  This kit can be used for both the 87-89 and 90-93 Mustangs.   Follow wire instructions as some wires won’t be used based on year of your car.

Fits Dakota Digital Dash Kits or other digital dash systems requiring long wires.

Contents:

• Digital EZ harness connectors (x2)

• Braided loom with shrink tubing

• Zip ties x2

• Heat shrink weatherproof butt connectors (x4)

• 1” x 1” peel and stick mounting pads

• Velcro pieces x2

• T-tap wire tap

• Self-tapping screw (for ground connection to chassis ground) (x1)

• Heat shrink weatherproof ring terminal for ground wire to chassis (x1)

• Labeled wires for speed sender, ground, 12V power, & GPS power

• ATC/ATO bladed fuse tap connector for connecting 12V power wire to fuse panel

*Depending on your installation location & application extra butt connectors may be needed.

**Unused wire ends should be taped off or use shrink tubing.

*** U.S. Patent Pending