Camshafts & Valvetrains

Trick Flow® hydraulic lifters and lash adjusters are the perfect choice to freshen up your engine during a cam swap. These affordable lifters and adjusters are designed to factory tolerances for a perfect fit and provide precise oil control to keep...

This high-grade steel distributor gear from MSD is specifically designed for use with the EFI 5.0L and 351W engines utilizing a hydraulic roller camshaft.  The gear is made for a distributor shaft diameter of .531".  

Generation 3 model You've asked, we've listened. Anderson Fabricated Aluminum Mustang Valve Covers with fill tube and 10AN fittings for remote catch can setups. No longer do you need to cut and make your own breather holes for a catch can on your...

Generation 3 model You've asked, we've listened. Anderson Fabricated Aluminum Mustang Valve Covers with fill tube and 10AN fittings for remote catch can setups. No longer do you need to cut and make your own breather holes for a catch can on your...

Anderson screw-on breather for stock Mustang 5.0 valve covers (No Logo) Fits: 1979 Mustang,1980 Mustang, 1981 Mustang, 1982 Mustang, 1983 Mustang, 1984 Mustang, 1985 Mustang, 1986 Mustang, 1987 Mustang, 1988 Mustang, 1989 Mustang, 1990 Mustang, 1991...

Anderson Cam Chain Retention ToolWith all of the cam testing we have done over the years on the 4.6 two valves, Anderson Ford Motorsport has developed a time-saving tool.This tool is used to remove the camshafts in the 4.6 two valve engines that are...

1.51" Diameter, 1.850" Recommended Install HeightSeat Pressure 200lb @ 1.850", Open Pressure 460lb @ 1.250"   MAX LIFT .600", Coil Bind 1.18" Recommended for boosted applications at or above 17 psi with our Anderson Hi-Rev series...

Anderson Steel Lined Rubber Valve Cover Gaskets. Fits all 86-95 5.0L/5.8L SBF engines. Perfect for use with AF-6582 series valve covers! Rubber gasket with steel core creates perfect seal and are reusable. Sold as a pair

Anderson Steel Retainers.  Fits HR-22018 Valve Springs, 10-Degree.

Anderson Steel retainers for HR-15018 and HR-20018 valve springs, 10 degree.

Anderson 10 degree steel, 11/32" locks

BBR Cam Phaser Lockouts for Ford 4.6L 3-Valve,  both camsLocks cam phasers in fully advanced or fully retarded position Eliminates possible piston to valve problems with aftermarket camshafts Eliminates possible cam phaser failure in high HP...

Cloyes street true roller timing sets are an excellent value. They have precision-machined, cast iron cam sprocket and induction-hardened, billet steel crank sprocket. The crank sprockets have three keyways for timing adjustment--2 degrees retarded, 4...

Ford OEM Cam Chains for 96-04 Mustang4.6 2VIncludes(2) 5W7Z-6268-AA

Ford OEM Intake & Exhaust cam gears with spacers for 96-04 4.6 2VIncludes(1) F8AZ-6256-BA(1) F8AZ-6256-AA(2) F3AZ-6265-A Availability lead time currently: 2-3 business days

Ford OEM Lash Adjuster for 05-10 4.6 Three Valve (each)

Ford OEM Lash Adjuster for 96-04 4.6 2V

Ford OEM Lower Crank Gear for 99-04 2V/4V

Ford OEM Lower Crank Gear for 96-00 4V

  Ford Racing Mustang Valve Covers What's a high-performance 5.0L Ford small block without a set of classic-looking valve covers! These Ford Racing valve cover kits are constructed from high-quality cast aluminum and feature a black satin finish,...