B-451 Camshaft 2800-6800 Range

B-451 Camshaft.  Requires aftermarket pistons and 1.6 roller rockers. Hydraulic Roller. Steel Core. Use steel camshaft gear.
RPM range 2800-6800

N2O or S/C 10-20lb 331-363 c.i.d. Best performer for 6600-6900 rpm shift point. Great with TFS TW or R's, Edelbrock RPM or Victor heads. Minimum 50lb injectors and 80mm to 92mm mass air. Recommended 3.73 to 4.10 gears, good drivability down to 2200 rpm, mild idle, rpm range 2800-6800, needs 3000-3200 converter. Must use AFM valve springs.

Read Tech Article

Example using B-451 camshaft
1990 LX, 5 speed,4.10,Anderson YSI-Trim Stage II 2.95- 8" pullies 363c.i,8.5:1compression, MondoBox/TFS-R intake.TFS heads,95lb injection, Velocity 95mm, aeromotive eliminator pumpsl, Anderson Power By-Pase kit, PMS controler, 116 fuel, Mr-Freeze, 142 degree intake charge

Example using B-451 camshaft
DSS 347 c.i. with Anderson Ultimate Street/Strip Forced Induction Top End Kit, B-451 camshaft, Anderson Stage II YSI-Kit w/PMS, Bassani 1 3/4 to 1 7/8 long tube headers, Bassani 3" X-pipe, Bassani 3" mufflers, Mr.Freeze, 93 pump fuel 




Example using B-451 camshaft
(Automatic) Lentec ,DSS 331c.i.,  9.2:1 compresion, B-451 camshaft, AFR 205 heads,PMS,,Twin AFM hivolume pumps,YSI-Trim 73-30t cogs,MSD 7al-2, 85LB injectors, Velocity 95mm,116 octane fuel, Mr. Freeze