Anderson/Vortech Si-Trim Self Lubricated Supercharger Tuner Kit with FREE Power Pipe®. Fits 94-95 Mustang

Anderson / Vortech Si-Trim Supercharger Tuner Kit With Power Pipe® For 94-95 Mustang

Kit Includes: Vortech V-3 Si-Trim self-lubricated supercharger, mounting bracket assembly with hardware, 8-rib pulley set with 6.87"/3.60" and 3.12", standard discharge assembly with couplers, standard bypass valve, and FREE AFM Power Pipe®!

9-10lbs of boost at 6k rpm with 3.60".

12-15lbs of boost at 6k rpm with 3.12".

"Tuner" kit means no fuel, ignition or tuning components included.

Installation note(s)*

For stock iron heads or GT40 iron heads we recommend using the 3.60" pulley.

If installing on a 94-95 Cobra there will be a few differences in the install process. The factory oil cooler you can keep or remove, however if you do keep you will need to pick up some flexible heater hose and reroute the cooler lines along with removing the metal coolant tube to install.

Belt routing was intended for all OEM accessory drive. If you do not have air pump or air conditioning you will need to custom route or install idlers in there place.

For all 94-95 vehicles you will need to vent the crankcase pressure to avoid blowing out seals on your engine. The easiest way will be to put a breather cap on your passenger side valve cover. Part number AF-26-1522 is what you will need.

Power pipe requires cutting and enlarging fender apron hole for installation

Air conditioning lines will be required to be bent and modified for installation

Due to popularity and different finish options lead times can vary on shipment, please see the "important order info" tab on the website for more details