Anderson Power Pipe®. Fits 86-93 Mustang 5.0L with Procharger & No A/C (AF-0109C)

Anderson Power Pipe® for Procharger F-1, P-Series, D-1SC without A/C on 86-93 Mustang 5.0

The Anderson Power Pipe®, with its  all 4" mandrel bent Ceramic coated inside and out construction, is the highest flowing inlet pipe available for centrifugal superchargers. We also put the air filter in the inner fenderwell for a cooler intake charge.

Flows 1247 cfm at 20,4" of water. Tested on our Super Flow 1200 flow bench

Download Instructions here

Anderson POWER PIPES® were developed because of the need for a supercharger intake pipe that would flow at a higher rate of CFM, with a larger volume of air, brought on by the demand that Vortech, Procharger and Paxton have when making 10 lb of boost or more.
Performance improvements with this innovative design have been fantastic!

Note* Installation will require cutting of the original driverside fender apron to accomodate the 4" diameter pipe. Relocation of the factory starter solenoid is also required.

The AF-0109C Power Pipe® increased inlet efficiency and HP
and raised boost from 16lb to 18.5lb on a D-1sc

Tested on 306 CID with B-451 Cam -
Run 031 with out Power Pipe® 568.7Rwhp@496.6RWTorq 
Run 041 with AF-0103C Power Pipe® 607.5RWHP@530.9RWTorq