Anderson - MF Kustoms Holley Terminator X Max Kit Gen 2 for 1994-1995 Mustang GT w/ AODE

For 94-95 Mustang GT with Manual/AODE/4R70W Transmission - Gen 2

Cut down and simplify your installation with the NEW Anderson - MF Kustoms Holley Terminator X Max kit for the pushrod SN95 Mustang!

AT LAST!!! A Terminator X kit designed for the 94-95 Mustang is here! Anderson Ford Motorsport has partnered with MF Kustoms to create a Terminator X kit that not only simplifies the installation process but also cuts down your labor time by nearly 80%! The key is the MF Kustoms plug & play adapter that plugs the Holley Terminator X into the factory EEC connector in the kick panel. This feature alone saves you a ton of labor on your installation. Not only that, the included adapter harness allows you to plug the included Bosch 4.9 wideband sensor to be used in the system. This system allows you to keep your factory wiring harness in tact and allows you to return everything back to factory if you so desired. The system is already pinned out properly for use with the factory Ford IAC motor and factory air conditioning if equipped. No messing with the CCRM is required! Another excellent feature is the dual CAN connections built into the harness to allow use for a 3.5" touchscreen handheld (additional option), digitial dash, and CAN-USB adapter (included) without needing an additional CAN splitter harness. All Holley Terminator X functionality remains the same tuning wise via the software and handheld (if purchased). Software and firmware updates are all available through Holley's website. This kit is the perfect solution if you have a great condition factory wiring harness.

Note*

You will need to setup some configurations for the system to work properly with the 94-95 factory components on the Holley software. See the link below on step by step instructions on how to set these up!

Link for configs

Ford Mustang 1994-1995 M.F. Plug and Play Adapter is compatible with the following:

• 1994-1995 Ford Mustang 5.0 - Manual Transmission
• 1994-1995 Ford Mustang 5.0 - Automatic Transmission (AODE)

Benefits:

• Utilizes the factory wiring and sensors
• Retain all factory instrument gauges
• Retain all factory controls (e.g. cruise control and air conditioning)
• Easy installation as most installations can be done in under two hours
• 2 x CAN BUS connections built into the Main Harness

Now Supporting:

• Aftermarket ignition systems (e.g. Holley Dual Sync or Cam/Crank trigger setup). Please note you will need to modify some wiring for the tachometer to function
• Two channels for conversion of Variable Reluctance (VR) to Hall Effect signal. One channel is designated for factory Vehicle Speed Sensor (VSS). The other channel is open for use with customer modifications to wiring (e.g. it could be used for traction control by adding a front wheel speed sensor).
  

Optional Sensor Connections:

• Fuel Pressure
• Oil Pressure
• Manifold Air Pressure
• Flex Fuel

For the optional sensors we have wired our sub harness to work directly with Low Doller Motorsports sensors. 

Flex Fuel requires the use of a Continental 13577379 or 13507129 sensor.

Included in the box:

• 1 x M.F. Adapter
• 1 x M.F. Main Harness
• 1 x M.F. Sub Harness
• Terminator X Max ECU
• ECU Power Harness
• OEM Bosch Wideband
• CAN to USB tuning cable

Not CARB certified or EO compliant, for Off-Road use ONLY

Optional:

3.5" Touchscreen Handheld

(System is setup to use the internal 1 bar MAP sensor for naturally aspirated combinations, however there is a terminated plug for use with external MAP sensors)

Shipping Note*

Due to low volume of order frequency for this kit we have moved these to a "made to order" basis. Please expect 1-2 weeks for shipment (possibly sooner) unless there is any back ordered components.