Anderson - MF Kustoms Holley Terminator X Kit 1994-1995 Mustang GT/Cobra Gen 2.

For 94-95 Mustang GT/Cobra with Manual Transmission

Cut down and simplify your installation with the NEW Anderson - MF Kustoms Holley Terminator X kit for the pushrod SN95 Mustang!

This adapter allows you to add a standalone engine management system to your project that is utilizing factory 1994-1995 Ford Mustang wiring.

Ford Mustang 1994-1995 M.F. Plug and Play Adapter is compatible with the following:

• 1994-1995 Ford Mustang 5.0 - Manual Transmission

Benefits:

• Utilizes the factory wiring and sensors
• Retain all factory instrument gauges
• Retain all factory controls (e.g. cruise control and air conditioning)
• Easy installation as most installations can be done in under two hours
• 2 x CAN BUS connections built into the Main Harness

Now Supporting:

• Aftermarket ignition systems (e.g. Holley Dual Sync or Cam/Crank trigger setup). Please note you will need to modify some wiring for the tachometer to function
• Two channels for conversion of Variable Reluctance (VR) to Hall Effect signal. One channel is designated for factory Vehicle Speed Sensor (VSS). The other channel is open for use with customer modifications to wiring (e.g. it could be used for traction control by adding a front wheel speed sensor).
  

Optional Sensor Connections:

• Fuel Pressure
• Oil Pressure
• Manifold Air Pressure
• Flex Fuel

For the optional sensors we have wired our sub harness to work directly with Low Doller Motorsports sensors. 

Flex Fuel requires the use of a Continental 13577379 or 13507129 sensor.

Included in the box:

• 1 x M.F. Adapter
• 1 x M.F. Main Harness
• 1 x M.F. Sub Harness
• Terminator X ECU
• USB to CAN tuning cable
• ECU Power Harness
• OEM Bosch 4.9 Wideband Sensor

Note*

You will need to setup some configurations for the system to work properly with the 94-95 factory components on the Holley software. See video below on step by step instructions on how to set these up!

This kit comes with everything you need to install into your 1994 or 1995 Mustang GT/Cobra. (Pushrod 5.0L/5.8L based engines)

Sub harness has the following connectors:

• Fuel Pressure
• Oil Pressure
• Manifold Air Pressure
• Flex Fuel

Not CARB certified or EO compliant, for Off-Road use ONLY

Optional:

3.5" Touchscreen Handheld

(System is setup to use the internal 1 bar MAP sensor for naturally aspirated combinations, however there is a terminated plug for use with external MAP sensors)

NOTE!!!! Due to extreme popularity and high demand for this system product availability could be delayed. Please contact us for ETA's. Orders will be processed first come first serve.