Anderson Ford Motorsport
Anderson - MF Kustoms Gen 2 Holley Terminator X Fox Body Kit
- SKU:
- AF-AFM-MFK937F2
- Availability:
- Out of Stock
- Shipping:
- $29.99 (Fixed Shipping Cost)
Description
For 86-93 Fox Body Mustang with Manual/AOD Automatic Transmission - Generation 2
Cut down and simplify your installation with the NEW Anderson - MF Kustoms Holley Terminator X kit for the Fox Body Mustang! This kit includes everything need to install into your Mustang and start tuning!
Ford Mustang 1986-1993 M.F. Plug and Play Adapter is compatible with the following:
- 1986-1993 Ford Mustang 5.0 - Manual Transmission
- 1986-1993 Ford Mustang 5.0 - Automatic Transmission (AOD)
Benefits:
- Utilizes the factory wiring and sensors
- Retain all factory instrument gauges
- Retain all factory controls (e.g. cruise control and air conditioning)
- Easy installation as most installations can be done in under two hours
- 2 x CAN BUS connections built into the Main Harness
Gen 2 Now Supporting:
- Aftermarket ignition systems (e.g. Holley Dual Sync or Cam/Crank trigger setup). Please note you will need to modify some wiring for the tachometer to function
- Two channels for conversion of Variable Reluctance (VR) to Hall Effect signal. One channel is designated for factory Vehicle Speed Sensor (VSS). The other channel is open for use with customer modifications to wiring (e.g. it could be used for traction control by adding a front wheel speed sensor).
Optional Sensor Connections:
- Fuel Pressure
- Oil Pressure
- Manifold Air Pressure
- Flex Fuel
For the optional sensors we have wired our sub harness to work directly with Low Doller Motorsports sensors.
Flex Fuel requires the use of a Continental 13577379 or 13507129 sensor.
Included in the box:
- 1 x M.F. Adapter
- 1 x M.F. Main Harness
- 1 x M.F. Sub Harness
- Terminator X ECU
- ECU Power Harness
- OEM Bosch Wideband
- USB to CAN tuning cable
Optional*
-
3.5" Touchscreen Handheld
- 3 BAR MAP Sensor (Boosted Applications)
(System is setup to use the internal 1 bar MAP sensor for naturally aspirated combinations, however there is a terminated plug for use with external MAP sensors)
Electric Fan Control (optional):
To make installing and controlling an aftermarket electric fan easy, the M.F. Adapter utilizes pin 41 on the Factory ECU connector as a ground trigger for a relay.
Note*
This system does NOT utilize any other additional Inputs/Outputs, if you want to run additional options (ex. secondary fuel pump, second electric fan, etc...) you will want to order the complete Fox Body kit HERE
To setup the configurations in the Holley software checkout this video below on the step by step process!
Not CARB certified or EO compliant, for Off-Road use ONLY
NOTE!!!! Due to extreme popularity and high demand for this system product availability could be delayed. Please contact us for ETA's. Orders will be processed first come first serve.