Anderson Level 2 Fuel System 86-95 Mustang 5.0L/5.8L

AFM has tested this exact fuel system setup and confirms that this system flows approx. 102 gallons per hour!

This utilizes the factory fuel tank with in-tank fuel pump module. This kit offers high quality components from some of the best manufacturers in the world.

Designed to work with pushrod 5.0L Mustangs or 351W/5.8L swapped Mustangs. Can be used for Naturally aspirated or Forced Induction utilizing pump gas. Level 2 systems are setup with a 8an feed and a 6an return.

This kit is not designed for use with E85 but all components are E85 capable.

Level 2 Kit can handle up to 750 RWHP with forced induction on pump gas and 850 RWHP naturally aspirated

(HP level may vary based on fuel injector size and fuel type/additives being used)

Kit Components:

• NEW!!! 525 "Hellcat" 470 LPH Fuel Pump Hanger Assembly from Aeromotive
  
• Anderson Fuel Rail Kit for 86-95 Mustang 5.0L (NEW! Clears TFI style distributor w/o spacers using included 45 degree adapter fitting)
  
• Fuel Pressure Regulator with fittings and gauge
• 10 Micron Fuel Filter with bracket and fittings
• 20 ft of -8AN Braided Stainless Steel PTFE Fuel Line - Feed
  
• 15 ft of -6AN Braided Stainless Steel PTFE Fuel Line - Return
• Fuel Pump Heavy Duty Wiring Relay Kit
• -6AN PTFE straight fittings (x2)
• -8AN PTFE straight fittings (x10)
• -6AN 90 degree fittings (x1)
• -8AN 90 degree fittings (x1)
• -8AN to -8AN 45 degree ORB rail adapter (x2) - for front fuel rail ports
  
• -8AN to -8AN 90 degree ORB rail adapter (x2) - for rear fuel rail ports
• -8AN to -6AN 90 degree ORB module fitting (x1)
• -6AN to -6AN 90 degree ORB module fitting (x1)
• Fuel line insulated mounting straps (x10 - hardware not included)

Basic knowledge of fuel systems is recommended. You will need to cut to length your fuel lines as the fitting ends are not preassembled onto the fuel lines. (we do NOT recommend high speed cutting tools when cutting the fuel lines to length, using hose shears for cutting is recommended) Part number 2989 hose cutting shears available here.

Note* Due to multipiece kit some components may take longer to receive than others. Please call to confirm availability and lead times.

This fuel system is modular, meaning this system and components can be manipulated/installed any which way the installer chooses. If different components are needed or more hoses you can purchase direct from Fore Innovations. The diagram pictured is a simple way to do this system installation.