Anderson Fuel Rail Adapter Fitting Kit

If you are looking to build your own fuel system on your Fox Body Mustang using the Anderson Fuel Rails then this fitting adapter kit may be the exactly you need to finish out your project. Everyone's combination is a little different and when something works for one person it may not work for the other. We found that certain brand hose end fittings do not get you the necessary clearance from the distributor or the heater core hoses. Due the design of the Anderson Fuel Rails many of the clearances are built in and when that is not enough we have taken the guess work out of which adapter fittings will help gain addtional clearances.

This fitting adapter kit contains four pieces. Each fitting will attach to one end of the fuel rail. Each fitting has a swivel joint to allow proper orientation the end user needs for installation of the fuel hoses. Depending on the fuel hose size we offer the adapter fitting kits in both -8AN to -6AN and -8AN to -8AN. The ORB w/o'ring side will attach the rail end and the AN side will attach to the fuel hose. Pretty simple and straght forward. The 90 degree adapters will attach to the backside of the rails (facing firewall) and the 45 degree adapters will attach to the frontside of the rails (facing radiator).

*Can be used for other connections as well based on your setup

Fits AF-1001 and AF-1001HP Fuel Rails

Kit Contents:

45 degree swivel AN adapter (x2)

90 degree swivel AN adapter (x2)

Example: