Anderson Boost Max Power Pipe® Kit I for 86-93 5.0L with Vortech/Paxton Superchargers

If you are running the standard Vortech/Paxton bracket and inlet tube on your supercharged 5.0L Mustang then this kit is for you! Eliminate belt slip and add approx. 1-2 lbs of boost without changing a supercharger pulley!

The Anderson Power Pipe®, with its all Aluminum mandrel bent construction, is the highest flowing inlet pipe available for centrifugal superchargers. We also put the mass air in the inner fenderwell for a cooler intake charge and gets rid of the factory tubing provided in the supercharger kit.

The standard tensioner bracket does an okay job but this kit includes what every Vortech owner has always wanted.
An easier way to adjust your Supercharger belt. ( For 8 rib pulley )

This billet adjuster mounts easily to your Supercharger and allows you to loosen the tensioner bolts and adjust tension with the Billet adjuster. This was designed on the 86-93 Mustang but could work on other applications.
For this to work on your application you must have the third tensioner bolt hole from the right (looking at the pulley) open and not covered by the tensioner bracket.

*If your existing tensioner plate is not straight across on the top edge, you will have to modify (cut) it to work with this tensioner.*

*Only works on standard bracket units, will not work with renegade brackets*

Kit includes:

AF-0101A.....Power Pipe for 86-93 5.0L Mustangs with Vortech/Paxton Superchargers

AF-0701..... Billet tensioner adjuster for centrifugal Superchargers