86-93 5.0L Mustang Accufab TPS & IAC KIT for Universal Holley EFI

If you want to have the ability to plug and play the Idle Air Control and Throttle Position Sensors with the Universal Holley HP, Terminator X or Dominator EFI wiring harnesses then this kit is for you. Accufab has created a setup that has made it easy to finish out your universal Holley EFI kit on your Ford throttle body. The standard Holley EFI harnesses do not use the Ford plugs on any OEM Ford sensor and you must wire them in on your setup, until now! This kit includes a new TPS and IAC sensor along with the correct harness connections to make this a true plug and play setup.

Kit includes:

IAC stepper sensor and polished adapter

TPS sensor and polished adapter

Recommend using Accufab throttle bodies

(throttle body not included)

Direct fit on Accufab Throttle Bodies, slight modification on other manufacturers t/b's may be required

*Note for Terminator X users

The Fox Body kit 550-937F, AFM Gen 1 and Gen 2 Systems will have the Ford wiring and connectors for the OEM style IAC and TPS sensors which will NOT work with this kit. However the non Ford universal Terminator X kit 550-937 uses the GM style plugs for both of these sensors and will have to be setup in the Holley software to be used.

*Change made for late 2023-current, the polished IAC adapter with the "Accufab" logo was reversed to to place the IAC at the bottom of the adapter versus towards the intake manifold.